Our Techs Restored These Bathroom Surfaces in Johns Island With a Superb Grout Cleaning Service

May 09, 2025

A homeowner in Johns Island started to notice a concerning pattern in many of her bathroom surfaces. When she tried to clean her bathroom floor, she never managed to improve the grout's color, so the floor ended up looking unhygienic at the end of the day. The master shower had a similar issue, on top of a leak that kept the seams looking sticky and worn down.


There were too many issues to address, and regular cleaners didn't help her make any progress, so the homeowner started looking for a grout cleaning service in Johns Island, SC. Luckily, Sir Grout Charleston wasn't hard to find, and she was relieved to see that our specialists had the experience to solve all the problems in her bathroom, from the floor's discoloration to the damage in the shower seams. The homeowner gave us a call later that day, and that same week our techs went to her house to inspect all her bathroom surfaces.

We started with the floor and immediately noticed that grime had soiled almost all the grout lines, making them go from white to an unattractive brown color. When it comes to the shower, the discoloration was more noticeable on the horizontal seams and around the bench, and it was caused by a combination of moisture, soap-based cleaners, and mineral residue. Large gaps could be seen on the corners and along most of the seams, which showed the damage that the surface had sustained over time.


Our techs confirmed the client's suspicions about traditional cleaners, explaining that these products gradually corrode hard surfaces while trapping the dirt under a foamy layer that permeates the grout pores. By contrast, our cleaning process involves no acidic ingredients, so the dirt is eliminated more safely and effectively. The client listened as we explained each step of the process and gratefully accepted our offer to return later for the restoration.

On the agreed-upon date, our experts returned to her house with all the necessary equipment to work on the shower and the bathroom floor. After preparing the area, we began cleaning every surface with a special non-toxic solution. This included scrubbing off the embedded dirt on the grout and providing glass treatment for the shower door. Then, our techs steam cleaned the stall to eliminate all traces of mold and efflorescence.

When it was time to repair the shower seams, our techs carefully removed the old caulk and installed epoxy grout on the horizontal joints, enhancing their resistance to water, mineral residue, and the effects of wear and tear. Then, we sealed the grout on the floor and the walls to restore its uniform color.

For this part of the process, we used Sir Grout's signature ColorSeal, making our way from the shower to the bathroom floor to make all the lines have the same pristine white color. Our sealant guarantees long-term protection because it repels external elements like water, mold, mildew, soap scum, and more, so homeowners can go for weeks without struggling to remove the stains on their bathroom surfaces.

This marked the end of another successful restoration, and the homeowner couldn't be happier. She was delighted by the bathroom's new appearance, especially after looking at the restored grout from up close. In only a few hours, the entire room went from looking dull to picture perfect, so there was no doubt in her mind that she'd made the right choice by calling our specialists.

Our techs took a moment to share some useful pointers before leaving the client's home. The first recommendation was to replace bleach and soap-based products with pH-neutral formulas like Sir Grout's Natural Hard Surface Cleaner. Our product has high-quality ingredients to bring maximum cleaning power to the most active parts of your home. Its composition also removes the risks attached to most off-the-counter formulas, because there are no toxic fumes released into the air and no discoloration in your shower surfaces.

To make the best out of pH-neutral products, our experts also recommend using non-abrasive tools like a towel or a squeegee. This approach is particularly helpful while removing the mold and soap residue that often gets stuck between bathroom tiles, so homeowners can scrub around hard-to-reach areas without accidentally scratching the ceramic.

Our final recommendation was to keep fresh air circulating in the bathroom throughout the day. As our experts explained, a simple way to improve indoor ventilation is by opening the bathroom door and the windows nearby. The shower will gather less moisture and the air will not become stale, especially if homeowners also make a habit of wiping any pools of water sitting on the floor.

You don't have to settle for lackluster results in your cleaning routine. The specialists at Sir Grout Charleston have assisted countless of homeowners in Johns Island and its surrounding areas, setting the standard for hard surface restoration with top-tier results. Don't hesitate to contact us if you want more details about the process. You can call (843) 920-6242 or schedule a free quote online to request an appointment. Also, don't forget to subscribe to our newsletter so you don't miss our latest promotions and updates. Contact us today, and Sir Grout Charleston will leave your bathroom looking better than ever!